OSHA does not publish a first aid kit contents list. The regulation, 29 CFR 1910.151(b), says adequate first aid supplies shall be readily available, and its non-mandatory Appendix A sends employers to ANSI Z308.1 for what a minimum kit looks like. That makes an ANSI Z308.1 first aid kit the practical baseline for any safety manager or facilities buyer who wants a defensible answer when the cabinet opens. The decision comes down to two classes, four container types, and a restock habit.
What OSHA actually requires
Paragraph (b) of 1910.151 has two parts. Where there is no infirmary, clinic, or hospital in near proximity, someone on site must be trained to render first aid, and adequate first aid supplies must be readily available. Paragraph (c) requires quick drenching or flushing facilities in any work area where eyes or body may be exposed to corrosive materials.
Appendix A is where ANSI enters. It is non-mandatory and still names the 1998 edition of Z308.1; the current edition is ANSI/ISEA Z308.1-2021, effective October 15, 2022. OSHA's 2002 interpretation letter is blunt about the relationship: Z308.1 was never adopted as an OSHA standard, but OSHA routinely points employers to it for minimum kit contents.
The same letter answers the questions buyers ask most:
- "Readily available" is not defined. OSHA's position is that the trained provider should not have to pass through several doorways, hallways, or stairways to reach supplies.
- There is no employee-to-kit ratio. Placement and quantity are the employer's call, based on a hazard assessment of that workplace.
- There is no fixed inspector checklist. Each site is judged against the injuries likely to occur there.
Our position: buy a kit labeled to ANSI/ISEA Z308.1-2021, document the hazard assessment that justified the class, and mount it where the provider can reach it in seconds. That answers the two questions an inspector asks, adequate and reachable.
Class A vs Class B: the ANSI Z308.1 first aid kit contents
Class A kits cover the most common workplace injuries: minor cuts and abrasions, minor burns, and eye irritation. Class B kits carry a broader range and larger quantities for more populated, complex, or higher-risk environments, and add a splint and a tourniquet.
The items below are where the two classes differ. Both also include adhesive tape, a CPR breathing barrier, cold packs, eye coverings, a first aid guide, a 2-inch roller bandage, scissors, sterile pads, and triangular bandages.
| Item | Class A | Class B |
|---|---|---|
| Adhesive bandages, 1 x 3 in | 16 | 50 |
| Antiseptic, 0.5 g | 10 | 50 |
| Antibiotic application, 0.5 g | 10 | 25 |
| Burn treatment, 0.9 g | 10 | 25 |
| Burn dressing, gel, 4 x 4 in | 1 | 2 |
| Eye wash | 1 fl oz | 4 fl oz |
| Hand sanitizer, 0.9 g | 10 | 20 |
| Medical exam gloves | 2 pair | 4 pair |
| Trauma pads, 5 x 9 in | 2 | 4 |
| Roller bandage, 4 in | none | 1 |
| Splint | none | 1 |
| Tourniquet | none | 1 |
| Foil blanket | 1 | 1 |
Two 2021 changes matter for older kits: a foil blanket was added to both classes, and hand sanitizer rose from 6 to 10 packets for Class A and 10 to 20 for Class B. A kit bought against the 2015 label needs a top-up.
Offices, retail floors, and classroom wings are Class A territory. Warehouses, manufacturing, kitchens, grounds crews, and any site with powered equipment, elevated work, or a long EMS response time should carry Class B. When in doubt, buy Class B. The upgrade is a handful of items.
Type I to IV enclosures
Class describes the contents. Type describes the container. Choose them independently.
- Type I: stationary, indoor, wall-mounted cabinet. Break rooms, health offices, front desks.
- Type II: portable, indoor, low risk of damage. Supervisor offices and indoor responder bags.
- Type III: portable or wall-mountable, indoor or outdoor, water-resistant seal. Loading docks, shop floors, outbuildings.
- Type IV: waterproof, tested for corrosion, moisture, and impact. Fleet vehicles, construction, grounds crews, marine.
Match the Type to where the kit lives, not where the buyer sits. A Type I cabinet bolted in a truck cab fails before its contents do.
Restock cadence and augmenting for hazards
The standard's guidance is to inspect supplies monthly and after any use. Make that stick with three habits: name an owner for each cabinet, keep an inspection card inside the door, and log lot and expiration on every dated item (antiseptic, ointment, burn gel, eye wash, hand sanitizer). Expired items come out, not pushed to the back.
Augmenting is where Appendix A does real work. It tells employers to mine their OSHA 300 and 301 logs for injury patterns, consult local fire and rescue or a medical professional, and reassess periodically. Common additions by hazard:
- Corrosives: the eye wash bottle in the kit does not satisfy 1910.151(c). Drenching or flushing facilities belong in the work area itself.
- Cutting tools and powered equipment: extra trauma pads, hemostatic dressings, and a second tourniquet.
- Heat and outdoor work: electrolyte replacement and extra cold packs.
- Blood exposure: Appendix A points to the bloodborne pathogens standard, 1910.1030(d)(3), for PPE: gloves, gowns, face shields, masks, eye protection. Stock extra nitrile exam gloves at the kit.
- Multiple buildings or shifts: more kits, not bigger kits. Readily available means reachable from every work area.
Bulk refills and OTC medications
Buy refills by item, not by replacing whole kits. Standardize on one Class A and one Class B model across every site so one refill list serves every cabinet, then order high-turn items by the case: adhesive bandages, antiseptic wipes, exam gloves, and hand sanitizer packets.
Oral medications are not in the Z308.1 minimum list. The standard treats analgesics, antihistamines, and similar products as supplemental items selected with a person competent in first aid and aware of the site's hazards. Which medications, if any, belong in your kit is a call for your safety lead and medical advisor, not your distributor. If you stock them, use unit-dose packets so every dose carries its own drug facts, lot, and expiration, and log them with the rest of the kit.
Keystone's OTC and first aid category covers unit-dose OTC, first aid kits and refills, eye wash, and burn care, sold by the case to health offices, corrections, and employers.
What Keystone supplies
Keystone Supply Group supplies Z308.1-2021 Class A and Class B kits, Type I through IV containers, bulk refills, and nitrile exam gloves from Edina, Minnesota, stocked locally or sourced through a 490+ distributor network with stated lead times on every quote line. Multi-site employers get one refill list, one delivery, and one invoice.
Browse OTC and first aid or send your site list and headcount for a quote. Same-day quotes during business hours, Net 30 for approved accounts, shipped from Edina or direct from the manufacturer. Reach sales at Orders@KeystoneSupplyGroup.com or (320) 808-3686.
Sources
- OSHA, 29 CFR 1910.151, Medical services and first aid: https://www.osha.gov/laws-regs/regulations/standardnumber/1910/1910.151
- OSHA, 1910.151 Appendix A, First aid kits (Non-Mandatory): https://www.osha.gov/laws-regs/regulations/standardnumber/1910/1910.151AppA
- OSHA, Standard Interpretation, Clarification of 1910.151 (April 18, 2002): https://www.osha.gov/laws-regs/standardinterpretations/2002-04-18-0
- First Aid Supplies Online, ANSI Z308.1-2021 Compliance for Workplace First Aid Kits: https://firstaidsuppliesonline.com/ansi-z308-1-2021-compliance/
- MFASCO Health & Safety, ANSI First Aid Standard Z308.1, 2021 Workplace Requirements: https://www.mfasco.com/blogs/workplace-health-safety/ansi-first-aid-standard
- Cintas, ANSI/ISEA Z308.1-2021 Updates: https://www.cintas.com/firstaidsafety/firstaidsupplies/fas-ansi-protocol/

